I attached a link to the instructions regarding the Redarc RedVision Vehicle Management System # RED89FR. The system has 6 plug-ins for water level sensors; it accommodates 2 to 5 pin sensor plugs. I am not sure which sensors you are plugging in, but feel free to send a photo and more information regarding your sensors and I will verify how they should be installed.
I reached out to Redarc for more information and this is what they told me regarding sensor installation:
RedVision is directly... view full answer...
The Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System part # LC672136 uses the jack for the initial leveling but when all four of the pods are deployed and leveled the jack will retract.
It is perfectly acceptable to use the jacks switch to redeploy it and use it as a fifth point of contact. From my experience there wouldn't be a need for any additional support from the jack as the system is very solid but you will have the option. view full answer...
To reverse the fan on your Derale # D15960, it is a little bit of a process. What you need to do is remove the fan, flip it around, and then reinstall it. view full answer...
Did you have have the awning roller wound too tight when you initially installed it? At the time of installation the awning roller should be wound 12-16 rotations to put sufficient tension on the springs. Sounds like you may have yours wound too tight! You'll want to remove your awning so that you can unwind it and rewind it the correct amount of times. view full answer...
The Americana Metal, Bolt-In Valve Stem # AM20906 is actually rated for up to 200 psi. Most people who tend to ask about the metal valve stem are looking at tires rated for 110 psi though which is why you see that psi rating a lot in our answers about this valve stem. Just be sure that the included washer mounts flush against your trailer wheel and you are good to go! view full answer...